home products @
@
œGo to Product Index
CRIMP TOOL

 

@


With 1 pair of our Connector Pliers, you can crimp in tidy finishing open-barrel connectors such as MOLEX, TE (Tyco), JST, HRS, etc. More than 100 different
terminals applicable!!

** PA-09 ideal for 1.25mm pitch and 2.5mm pitch mico connectors or D-sub connectors (#32-20 wires)

** PA-20 ideal for 2.5mm pitch and 5mm pitch connectors, 2.5mm-thick dies

** PA-21 ideal for 2.5mm pitch and 5mm pitch, also good for long-wing type of open-barrels owing to elaborately curved design of the upper die.



 
  Open-Barrel Contacts     AWG adaptable  
Open-Barrel Contacts    

AWG”32`20 (PA-09)
AWG#28`18 (PA-20)
AWG#26`18 (PA-21)

 
 

PA-09

PA-20

PA-21

with strap hole

(PA-09, PA-20)

 

 

 

 

 

 

 

 

 

 

(PA-21)


(Curled in excellent finish with PA-21 dies)

 

 

 

‘ FEATURES
œ D-Sub connector contact can be also crimped.
œ Original joint screw prevents the joint from being loose and offers you easy maintenance.
œ With locking latch and coiled spring
œ Oil resistant Elastomer (TPR) handle
œ Pliers body made of S55C carbon steel
œ 135g compact body for fatigue-free work

 


 

 

 

 

 

 

 

 
4-different cavities
of elaborate dies
@
 
Made of thin dies
(Photo: PA-09)
Wire barrels and
insulation barrels individually crimped
 

‘SPECIFICATIONS@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

Model
Dies
W(mm)
Dies
H(mm)
Dies
T(mm)
Wires applicable (Ref.)
mmƒΣ mm2 AWG (wires)
PA-09 1.0 0.50 1.7 ‚”hick 0.20`0.32 0.031`0.08 ”32 to 28
1.4 0.55 0.32`0.51 0.08`0.21 ”28 to 24
1.6 0.8 2.0 thick 0.51`0.64 0.21`0.33 ”24 to 22
1.9 0.9 0.51`0.81 0.21`0.52 ”24 to 20
 
PA-20 1.6 0.7 2.5 thick 0.32`0.64 0.08`0.33 #28 to 22
1.9 0.8 0.51`0.81 0.21`0.52 #24 to 20
2.0 0.9 0.64`1.02 0.33`0.82 #22 to 18
2.3 1.0 0.81`1.02 0.52`0.82

#20 to 18

 
PA-21 1.6 0.8 1.8mm 0.41`0.51 0.13`0.21 ”26`24
1.9 1.0 0.41`0.64 0.13`0.33 ”26`22
2.2 1.2 0.51`0.81 0.21`0.52 ”24`20
2.5 1.4 0.64`1.02 0.33`0.82 ”22`18
‘ HOW TO CRIMP MICRO CONNECTOR PIN FINELY
* Adjust both wings of open-barrels to be in parallel before crimping. (Ref. photo 1 below)
* Make sure that connector pin retains straight before insertion into a die cavity.
* Do not lay the connector pin inclined in a die cavity to avoid deforming in crimping work.
* Do not squeeze handles so hard while crimping insulation portion, which may cause disconnection of wires.

       
  (1) Adjust barrels of pin (2) Crimp conductor first (3) Crimp insulation next.  


@
@
£TOP
@ bHOMEbPRODUCTSbE-LINKbE-MAILb
engineer inc.